Beko DHR73431 Installation and Operation Instructions - Page 29

Cleaning the filter drawer

Page 29 highlights

7.4 Cleaning the filter drawer • Take out the filter drawer sponge. Lint and fiber that could not be captured by the lint filter are blocked in the filter drawer behind the kick plate. Filter Drawer Cleaning warning light will light up maximum at every 5 drying cycles as a reminder. There is a two-level filter in the filter drawer. Te first level is the filter drawer sponge and the second level is the filter cloth. To clean the filter drawer: • Press the kick plate button to open the kick plate. • Clean lint, fiber, and cotton raveling on the filter cloth by hand or with a soft piece of cloth. • When you notice a layer that may lead clogging on the filter cloth, please clean the layer by washing in warm water. Let the filter cloth dry thoroughly before installing back the filter drawer. • Remove the filter drawer cover by turning it in the direction of arrow. • Pull out the filter drawer. • Wash the filter drawer sponge by hand to remove the fiber and lint on the surface. After washing the sponge, squeeze it by hand and remove the excess water. Well-dry the sponge before storing it. C It is not necessary to clean the sponge if lint and fiber accumulation on it is not significant. • Place the sponge back into its place. • Open the filter drawer by pressing the red button. Dryer / User Manual EN 29 / 36

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

Dryer / User Manual
EN 29 / 36
7.4 Cleaning the filter drawer
Lint and fiber that could not be captured by the lint
filter are blocked in the filter drawer behind the kick
plate. Filter Drawer Cleaning warning light will light up
maximum at every 5 drying cycles as a reminder.
There is a two-level filter in the filter drawer. Te first level
is the filter drawer sponge and the second level is the
filter cloth.
To clean the filter drawer:
Press the kick plate button to open the kick plate.
Remove the filter drawer cover by turning it in the
direction of arrow.
Pull out the filter drawer.
Open the filter drawer by pressing the red button.
Take out the filter drawer sponge.
Clean lint, fiber, and cotton raveling on the filter
cloth by hand or with a soft piece of cloth.
When you notice a layer that may lead clogging on
the filter cloth, please clean the layer by washing
in warm water.
Let the filter cloth dry thoroughly
before installing back the filter drawer.
Wash the filter drawer sponge by hand to remove
the fiber and lint on the surface. After washing the
sponge, squeeze it by hand and remove the excess
water. Well-dry the sponge before storing it.
C
It is not necessary to clean the sponge
if lint and fiber accumulation on it is not
significant.
Place the sponge back into its place.