Beko DHR73431 Installation and Operation Instructions - Page 27

7 Maintenance and cleaning Service life of product extends and frequently • A layer can build up on the filter pores that can experienced problems will be reduced if it is cleaned at cause clogging of the filter after using the dryer regular intervals. for a while. Wash the lint filter with warm water to remove the layer that builds up on the lint 7.1 Cleaning Lint Filter / Loading Door filter surface. Dry the lint filter completely before Inner Surface reinstalling it. Lint and fibre released from the laundry to the air during the drying cycle are collected in the Lint Filter. C Such fibre and lint are generally formed during wearing and washing. A Always clean the lint filter and the inner surfaces of the loading door after each drying process. C You can clean the lint filter housing with a vacuum cleaner. • Clean the entire inner surface of the loading door and loading door gasket with a soft damp cloth. To clean the lint filter: • Open the loading door. • Remove the lint filter by pulling it up and open the lint filter. • Clean lint, fibre, and cotton raveling by hand or with a soft piece of cloth. • Close the lint filter and place it back into its housing. Dryer / User Manual EN 27 / 36