Asus RS300-E11-PS4 RS300-E11 Series User Manual - Page 38
Apply some Thermal Interface, tighten them one by one in
![]() |
View all Asus RS300-E11-PS4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
10. Push the load lever down and insert it under the retention tab to secure the CPU in the socket. 11. Apply some Thermal Interface Material to the exposed area of the CPU that the heatsink will be in contact with, ensuring that it is evenly spread in a thin layer. Some heatsinks come with preapplied Thermal Interface Material. If so, skip this step. The Thermal Interface Material is toxic and inedible. DO NOT eat it. If it gets into your eyes or touches your skin, wash it off immediately and seek professional medical help. 12. Align the heatsink to the CPU socket, then twist each of the four screws with a screwdriver just enough to attach the heatsink to the motherboard. When the four screws are attached, tighten them one by one in the sequence shown in the illustration to completely secure the heatsink. The heatsink screws are T20 models. A torque value of 16.1±1.2 kgf-cm (14.0±1.0 lbf-in) is recommended. 2-6 Chapter 2: Hardware Information
![](/manual_guide/products/asus-rs300e11ps4-rs300e11-series-user-manual-26b20d6/38.png)