Asus ROG STRIX Z390-E GAMING ROGSTRIXZ390-EGAMINGBIOSEMWEB Users Manual Englis - Page 51
APM Configuration, Serial Port Configuration, ErP Ready, Restore AC Power Loss
View all Asus ROG STRIX Z390-E GAMING manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Serial Port Configuration Serial Port Configuration Allows you to turn Serial Port on or off. Configuration options: [On] [Off] The following item appears only when you set Serial Port to [On]. Change Settings Allows you to choose the setting for Super IO device. Configuration options: [IO=3F8h; IRQ=4] [IO=2F8h; IRQ=3] [IO=3E8h; IRQ=4] [IO=2E8h; IRQ=3] 1.6.8 APM Configuration ErP Ready This item allows you to switch off some power at S4+S5 or S5 to get the system ready for ErP requirement. When set to [Enabled], all other PME options are switched off. Configuration options: [Disabled] [Enabled (S4+S5)] [Enabled (S5)] Restore AC Power Loss This item allows your system to go to ON state, OFF state, or both states after an AC power loss. When setting your system to [Last State], it goes to the previous state before the AC power loss. Configuration options: [Power Off] [Power On] [Last State] Power On By PCI-E This item allows you to enable or disable the Wake-on-LAN function of the onboard LAN controller or other installed PCI-E LAN cards. Configuration options: [Disabled] [Enabled] ROG STRIX Z390-E GAMING BIOS Manual 51