Asus ProArt Z490-CREATOR 10G Intel 400 series Channel BIOS UM English - Page 44

Titan Ridge Workabout for OSUP This item allows you to enable or disable Titan Ridge Workabout for OSUP. Configuration options: [Disabled] [Enabled] Tbt Dynamic AC/DC L1 This item allows you to enable or disable Tbt Dynamic AC/DC L1 support. Configuration options: [Disabled] [Enabled] Wake From Thunderbolt(TM) Devices This item allows you to enable or disable system wake from Thunderbolt(TM) devices. Configuration options: [On] [Off] Security Level This item allows you to select the security selection. Configuration options: [No Security] [User Authorization] [Secure Connect] [Display Port only] [USB Docking Only] SW SMI on TBT hot-plug When this item is set to [Enabled], BIOS generates software SMI to assign resource to TBT devices. Configuration options: [Disabled] [Enabled] ACPI Notify on TBT Hot-plug When this item is set to [Enabled], BIOS generates ACPI Notify. Configuration options: [Disabled] [Enabled] Thunderbolt(TM) Configuration The items in this submenu allow you to configure Thunderbolt(TM) related configurations. GPIO3 Force Pwr Configuration options: [On] [Off] Wait time in ms after applying Force Pwr This item allows you to set the wait time (in milli seconds) before accessing the TBT controller, after Force Pwr is asserted. The values range from 1 to 5000. GPIO filter GPIO filter is neeeded to avoid electrical noise on PCH GPIOs during hotplug of 12V USB devices. Configuration options: [Disabled] [Enabled] Enable CLK RWQ This item allows you to enable clock request (CLKREQ#) for all upstream ports. Configuration options: [Disabled] [Enabled] Enable ASPM This item allows you to enable ASPM support for all downstream ports and endpoint devices. Configuration options: [Disabled] [L0s] [L1] [L0sL1] 44 PRIME/PRO/ProArt/TUF GAMING Intel 400 Series BIOS Manual