Asus ProArt Z490-CREATOR 10G Intel 400 series Channel BIOS UM English - Page 42
PCH-FW Configuration, SMART Self Test, SATA6G_1Gray - SATA6G_6Gray
View all Asus ProArt Z490-CREATOR 10G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
SMART Self Test S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitoring system that shows a warning message during POST (Power-on Self Test) when an error occurs in the hard disks. Configuration options: [On] [Off] SATA6G_1(Gray) - SATA6G_6(Gray) The items in this submenu may vary according to your motherboard. SATA6G_1(Gray) - SATA6G_6(Gray) This item allows you to enable or disable the selected SATA port. Configuration options: [Disabled] [Enabled] SATA6G_1 - SATA6G_6 Hot Plug These items appears only when the SATA Mode Selection is set to [AHCI] and allows you to enable or disable SATA Hot Plug Support. Configuration options: [Disabled] [Enabled] 1.6.6 PCH-FW Configuration This item allows you to configure the firmware TPM. PTT This item allows you to enable or disable PTT in SkuMgr. Configuration options: [Disabled] [Enabled] 42 PRIME/PRO/ProArt/TUF GAMING Intel 400 Series BIOS Manual