Airlink AR686WV2 User Manual - Page 27
Wireless
View all Airlink AR686WV2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
3.2.5 Operation Mode Select which mode you would like to run in: Router Mode: Router mode will allow the AR686WV2 to act as a normal router with its own DHCP server and IP Address. Bridge Mode: Turn the AR686WV2 into a bridge by selecting Bridge Mode and pressing Save. NOTE: If would like to return the AR686WV2 from Bridge Mode to Router Mode, you will need to perform a factory reset by holding the reset button for 10 seconds with the power attached. 3.3 Wireless Here you can configure the Networking properties of the router. 23
23
3.2.5 Operation Mode
Select which mode you would like to run in:
Router Mode:
Router mode will allow the AR686WV2 to act as a normal router with
its own DHCP server and IP Address.
Bridge Mode:
Turn the AR686WV2 into a bridge by selecting
Bridge Mode
and
pressing
Save.
NOTE:
If would like to return the AR686WV2 from Bridge Mode to Router Mode, you will
need to perform a factory reset by holding the reset button for 10 seconds with the power
attached.
3.3 Wireless
Here you can configure the Networking properties of the router.