Adaptec 5805Z User Guide - Page 90
Viewing the Event Log, Enter, Ctrl+P, Controller Log Information
UPC - 760884156186
View all Adaptec 5805Z manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Appendix C: Using the Adaptec RAID Configuration Utility ● 90 ● Storage Enclosure Processor (SEP) managed devices-The connection is determined by an active backplane. Box0 (enclosure 0) is connected to slot0 (disk drive slot 0 in the enclosure). For more information, see Backplane Connections on page 69. ● Expanders-The connections is determinded by an expander. Exp0 (expander 0) is connected to phy0 (phy 0 within a connector). For more information, see SAS Expander Connections on page 70. Note: Devices other than disk drives (CDROM, tape drives, etc...) are listed in order after your system disk drives. Viewing the Event Log The BIOS-based event log records all firmware events, such as configuration changes, array creation, and boot activity. Some events are not stored indefinitely-the event log is cleared of any non-persistent events each time you restart your computer; additionally, once the log is full, new events overwrite old events. To view the event log: 1 Start the ARC utility (see page 82). 2 Select the controller you want, then press Enter. 3 When the ARC utility menu appears, then press Ctrl+P. 4 Select Controller Log Information, then press Enter. The current event log opens.