Adaptec 5805Z User Guide - Page 86
Managing Existing JBODs, Converting a JBOD Into a Simple Volume
UPC - 760884156186
View all Adaptec 5805Z manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Appendix C: Using the Adaptec RAID Configuration Utility ● 86 Managing Existing JBODs To delete a JBOD or morph a JBOD into a simple volume, select Manage JBODs from the main ACU menu. From the Manage JBODs menu, you can: ● Morph a JBOD into a simple volume. ● Delete a JBOD Note: When you delete a JBOD, you lose all data on that disk. Converting a JBOD Into a Simple Volume You can convert any JBOD into a simple volume. 1 Select Manage JBODs from the main ACU menu. 2 Select the JBOD that you want to morph into a simple volume and press Ctrl+V. Using SerialSelect to Modify Controller Settings The SerialSelect utility is a tool for modifying the settings of your controller and the disk drives connected to it. Opening SerialSelect To open SerialSelect, start the ARC utility (see page 82), select SerialSelect, then press Enter. Follow the on-screen instructions to modify the settings of your controller and connected disk drives as required. Applying Changes and Exiting 1 To exit SerialSelect, press Esc until you are prompted to exit. If you modified any settings, you are prompted to save the changes before you exit. 2 Select Yes to exit, then press any key to restart your computer. Any changes you made take effect after the computer restarts. Modifying Your Controller's Configuration Note: Default controller settings are suitable for most computers. Adaptec recommends that you do not change the default setting. To modify your controller's basic settings, select Controller Configuration from the main SerialSelect menu. To modify your controller's power management settings, select Advanced Configuration. Note: The PHY settings are read-only and not editable. This section describes the controller configuration options. Some options may not be available for your controller.