Adaptec 2025SA User Guide - Page 74
Using SATASelect and SCSISelect
UPC - 760884145326
View all Adaptec 2025SA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Adaptec RAID Configuration Utility (ARC) Using SATASelect and SCSISelect The SATASelect and SCSISelect utilities allow you to change controller and device settings without opening the computer cabinet or handling the controller. To access these utilities: 1 Restart the computer, then press Ctrl+A when prompted to access the ARC utility. 2 If multiple controllers are installed, select the controller you want to configure, then press Enter. 3 From the ARC menu, select SATASelect Utility or SCSISelect Utility. The available options are listed in the table below. This section... Controller Configuration Options SATA Configuration Options SCSI Configuration Options Applies to... All controllers SATA controllers only SCSI controllers only These options are discussed in the sections that follow. To select a menu option, browse with the arrow keys to the option, then press Enter. In some cases, selecting an option displays another menu. You can return to the previous menu at any time by pressing Esc. To restore the original default values, return to Configure/View Host Adapter Settings, then press F6. 4 To exit the utility, press Esc until a message prompts you to exit. (If you changed any host adapter settings, you are prompted to save the changes before you exit.) Choose Yes to exit and restart the computer. Any changes you made take effect after restart. A-9