Adaptec 2025SA User Guide - Page 70
Viewing Array Properties, Making an Array Bootable, Notes, Manage Arrays, Enter, RAID 0
UPC - 760884145326
View all Adaptec 2025SA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Adaptec RAID Configuration Utility (ARC) Viewing Array Properties To view the properties of an existing array: 1 From the ACU main menu, select Manage Arrays. 2 From the List of Arrays dialog box, select the array you want to view, then press Enter. To view properties related to the array's physical disks: - RAID 0, 1, 5 (Single-Level Arrays)-View the Array Properties dialog box. - RAID 10, 50 (Dual-Level Arrays)-Highlight the array member you want to view, then press Enter to display the second level. Press Enter again to display the physical disks associated with the array. Note: Failed drives are displayed in a different text color. 3 Press Esc to return to the previous menu. Making an Array Bootable Notes: ■ If the controller is not a boot device, you can disable its runtime BIOS. (For details, see the table on page A-10.) When the BIOS is disabled, it does not occupy any of the expansion ROM region of the system's memory map. In a system with several expansion ROMs, disabling the BIOS may be helpful. ■ The controller always uses the lowest numbered array as its bootable array. If you delete Array 00, the next lowest numbered array becomes the bootable array. ■ You cannot make a non-00 array bootable while the array is in a build/verify or rebuild process. ■ You may need to change the system BIOS to modify the boot order. For more information, refer to the system documentation. A-5