Actiontec MyWirelessTV Wireless HD Receiver Installation Guide - Page 1
Actiontec MyWirelessTV Wireless HD Receiver Manual
View all Actiontec MyWirelessTV Wireless HD Receiver manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
MWTVrx_QS3_QS sngl pnl 9/13/11 4:40 PM Page 1 A How MyWirelessTV Works MyWirelessTV allows you to place an HDTV anywhere in your home because it transmits your video and audio wirelessly. B Pair New Receiver to Existing Transmitter 1 Step Get the power supply and Receiver from the box and place them near the existing MyWirelessTV HD Transmitter. 2 Step Plug the smaller end of the power supply into the 5VDC port on the back of the Receiver. Use this Receiver to connect an additional HDTV to your existing MyWirelessTV HD Transmitter. Note: Only use power adapter,Leader Electronics Inc.,Model MU12-G050200-A1 3 Step Plug the larger end of the power supply into a power outlet. 4 Step Make sure the Power Light on the Receiver is SOLID Green. 5 Step Press the Sync button on the new Receiver for at least 5 seconds. 6 Step Now press the Sync button on the existing Transmitter for at least 5 seconds. 7 Step Wait 40-45 seconds. The Power Light on the Receiver should be SOLID Green and the Sync Light on the Receiver should be Blinking Green. Congratulations! You have successfully paired the new Receiver to the existing Transmitter. C Connect the Cables 1 Step a Unplug the new Receiver and its power supply. Go to the HDTV that you want to connect. 1 Step b Plug the smaller end of the power supply into the 5VDC port on the back of the Receiver. 1 Step c Plug the larger end of the power supply into a power outlet. 1 Step d Make sure the Power Light on the Receiver is SOLID Green. CAUTION Do NOT place the MyWirelessTV Receiver on top of or near a heat-generating source. Please refer to this illustration while connecting cables 2 1 3 RECEIVER MWTV200R HDTV (Optional) POWER OUTLET 1 Step e Wait 30-45 seconds.The Power and Wireless Lights should be SOLID Green, and the Sync Light should be Blinking Green. Note: If the Sync Light is SOLID Orange, wait another 10-15 seconds. It should turn GREEN. If the Sync Light stays SOLID Orange you will need to manually pair the units again. If the Sync Light is Blinking Red the units can't connect or are out-of-range. 2 Step a Get the HDMI cable from MyWirelessTV Kit. 2 Step b Plug one end of this HDMI cable into an HDMI port on the HDTV. 2 Step c Plug the other end of the HDMI cable into the HDMI Out to TV port on the back of the Receiver.The HDTV should now be connected to the Receiver. 2 Step d Turn on the HDTV near the Receiver. Make sure you have selected the correct source input on the TV.You should be able to see video from the source device. Flip this Quick Start Guide over to continue NEXT