Acer Altos R701 Altos R700 Chassis Subassembly - Page 67

Installing a Redundant Fan, While pushing on the tab, lift up on the module to clear

Get Acer Altos R701 PDF manuals and user guides View all Acer Altos R701 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 67 highlights

59 21 21. Connect the power cord(s) to the power cord receptacle(s) and plug the cord(s) back into the power source. Installing a Redundant Fan 1 Before removing the cover to work inside the system, observe the safety guidelines on page 48. 2 Remove the cover from the chassis. 3 Remove the full-height PCI riser card. 4 Remove the flex circuit cable retention clip. 5 Disconnect the flex circuit cable from the backplane. 6 At the end of the fan module closest to the chassis centerline, push on the tab to release it from the chassis (A). 7 While pushing on the tab, lift up on the module to clear the retention stub. 8 Slide the module towards the power supply until it comes free. 9 Lift the fan module out of the chassis.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
59
21
21. Connect the power cord(s) to the power cord receptacle(s) and
plug the cord(s) back into the power source.
Installing a Redundant Fan
1
Before removing the cover to work inside the system, observe the
safety guidelines on page 48.
2
Remove the cover from the chassis.
3
Remove the full-height PCI riser card.
4
Remove the flex circuit cable retention clip.
5
Disconnect the flex circuit cable from the backplane.
6
At the end of the fan module closest to the chassis centerline, push
on the tab to release it from the chassis (A).
7
While pushing on the tab, lift up on the module to clear the
retention stub.
8
Slide the module towards the power supply until it comes free.
9
Lift the fan module out of the chassis.