Acer Altos R701 Altos R700 Chassis Subassembly - Page 38
Connect Flex Circuit Cable, kit. Connect the end marked P1-Motherboard to the floppy
![]() |
View all Acer Altos R701 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
30 2 Assembling the System 4 While pressing down on the fan module, slide it in the direction of arrow (2) until the latch snaps into place. 5 Connect the fan power cables to the server board. Connect Flex Circuit Cable 1 Remove the flex circuit cable from the cable bag in the accessory kit. Connect the end marked "P1-Motherboard" to the floppy/ front panel/IDE connector on the server board. Route the cable to
![](/manual_guide/products/acer-computers-altos-r700-altos-r700-chassis-subassembly-a4b6f71/38.png)
2 Assembling the System
30
4
While pressing down on the fan module, slide it in the direction of
arrow (2) until the latch snaps into place.
5
Connect the fan power cables to the server board.
Connect Flex Circuit Cable
1
Remove the flex circuit cable from the cable bag in the accessory
kit. Connect the end marked “P1-Motherboard” to the floppy/
front panel/IDE connector on the server board. Route the cable to