Acer Altos R5250 User Manual - Page 68
To remove a DIMM, To recon the system memory
View all Acer Altos R5250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
50 To remove a DIMM: 3 System upgrade Important: Before removing any DIMM from the mainboard, make sure to create a backup file of all important data. 1 Perform the pre-installation instructions described on page 28. 2 Remove the air duct to access the DIMM slots. Perform the instructions described in "To remove the air duct" section on page 33. 3 Press the holding clips on both sides of the DIMM slot outward to release the DIMM (A). 4 Gently pull the DIMM upward to remove it from the DIMM slot (B). B A 5 If you intend to install a new DIMM, refer to previous section for related procedure, otherwise reinstall the air duct, then observe the post-installation instructions described on page 28. To reconfigure the system memory: The system automatically detects the amount of memory installed. Run the BIOS setup to view the new value for total system memory and make a note of it.