Acer Altos R5250 User Manual - Page 53
Configuring the storage devices, Removing and installing a hard disk drive
![]() |
View all Acer Altos R5250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
35 Configuring the storage devices The system accommodates slim-line optical drives and can support up to three 3.5-inch hot-plug SAS/SATA2 hard disk drives. Removing and installing a hard disk drive Note: Use only Acer-qualified SAS or SATA2 HDDs. To purchase a SAS or SATA2 HDD, contact your local Acer representative. Caution! To ensure proper airflow and server cooling, all drive bays must contain either a carrier with a hard drive installed in it or a hard disk carrier cover. Determining drive status Each HDD carrier features two status LED indicators to display the hard drive status. If you are replacing a failed HDD, determine which drive has failed by checking the drive status LED. For more information on how to determine the drive status, refer to "Hot-plug HDD LED indicator" on page 16. To remove an HDD: 1 Observe the ESD precautions described on page 28. 2 Remove the front bezel. Perform the instructions described in "To remove the front bezel" section on page 29. 3 If you are removing a failed HDD, determine which drive has failed by checking the drive status LEDs.
![](/manual_guide/products/acer-computers-altos-r5250-user-manual-081ee58/53.png)