Acer Altos G5450 User Manual - Page 61
Installing an additional hard drive, To install a hot-plug hard drive
![]() |
View all Acer Altos G5450 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
43 Installing an additional hard drive The Altos G5450 HDD cage models supports both SATA2 and SAS hard drives in different capacities. Note: If you intend to install a SAS hard drive model, you first need to install the add-on SAS controller card option. For related instructions, go to page 60. To install a hot-plug hard drive: 1 If necessary, unlock the front bezel, then pull it open. 2 Remove the HDD dummy cover from the cage. 3 Prepare the blank HDD carrier for installation. (1) Remove the four screws that secures the blank frame. You will use these screws to secure the hard disk later. (2) Detach the plastic frame from the HDD carrier.
![](/manual_guide/products/acer-computers-altos-g5450-user-manual-1cee1c5/61.png)
43
Installing an additional hard drive
The Altos G5450 HDD cage models supports both SATA2 and SAS hard
drives in different capacities.
Note:
If you intend to install a SAS hard drive model, you first
need to install the add-on SAS controller card option. For related
instructions, go to page 60.
To install a hot-plug hard drive:
1
If necessary, unlock the front bezel, then pull it open.
2
Remove the HDD dummy cover from the cage.
3
Prepare the blank HDD carrier for installation.
(1)
Remove the four screws that secures the blank frame.
You will use these screws to secure the hard disk later.
(2)
Detach the plastic frame from the HDD carrier.