Acer AW2000h-AW170hq User Manual - Page 62
Upgrading the system memory
View all Acer AW2000h-AW170hq manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
46 3 System upgrades Upgrading the system memory System memory interface Each processor has three memory channels (1, 2 and 3 ) and each channel has two slots - A (PxDIMM1A, 2A, 3A in blue) and B (PxDIMM1B, 2B, 3B in black). So, the system has a total of twelve memory slots. The memory slots support DDR3-1333 registered/ unbuffered ECC memory modules. The folllowing illustration shows the processor 1 memory slots (1) and processor 2 memory slots (2). Memory population guide Independent mode • For all memory modes, slot A in each channel should be populated first and then slot B. If slot A is empty, then slot B cannot be used. • For a single-processor server configuration, install the processor in CPU1 socket and the memory modules in slots P1DIMM 1A to P1DIMM 3B. • If there is a processor installed in CPU2 socket, the system will enable the slots P2DIMM 1A to P2DIMM 3B. • It is recommended to install the DIMM modules in the following sequence: For single processor • Populate slot 1A first, followed by slots 2A, 3A,1B, 2B and 3B. • The memory slots for processor 2 are not available.