AEG TR848P4B User Manual - Page 25

Problem, Possible cause, Remedy

Get AEG TR848P4B PDF manuals and user guides View all AEG TR848P4B manuals
Add to My Manuals
Save this manual to your list of manuals

Page 25 highlights

ENGLISH 25 Problem Possible cause Remedy Incorrect program selection. Select a suitable program. 1) The filter is clogged. Clean the filter. 2) Dryness Level option was set to iron dry.3) Change Dryness Level option to a higher level. Unsatisfactory drying result. The load was too large. The airflow slots are clogged. Do not exceed the maximum load size. Clean the airflow slots at the bot‐ tom of the appliance. There is some dirt on the humidity Clean the front surface of the sensor in the drum. drum. The dryness level was not set to the desired level. Adjust the dryness level. 4) The condenser is clogged. Clean the condenser. 2) The loading door does not close The filter is not locked into posi‐ tion. Laundry is trapped between the door and the seal. Put the filter in the correct position. Remove trapped items and close the door. It is not possible to change the program or op‐ tion. After a cycle starts it is not possi‐ ble to change the program or op‐ tion. Turn the tumble dryer off and on. Change the program or option as required. It is not possible The option you tried to select is not Turn the tumble dryer off and on. to select an op‐ available for the selected program. Change the program or option as tion. An acoustic required. signal is emit‐ ted. There is no drum light Defective drum lamp. Contact the service centre to re‐ place the drum lamp. Unexpected du‐ ration time ap‐ pears on the display. The drying duration is calculated according to load size and damp‐ ness. This is automated - the appliance is working correctly. A program is in‐ The water container is full. active. Drain the water container, push the Start/Pause button. 2)

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
Problem
Possible cause
Remedy
Unsatisfactory
drying result.
Incorrect program selection.
Select a suitable program.
1)
The filter is clogged.
Clean the filter.
2)
Dryness Level option was set to
iron dry
.
3)
Change Dryness Level option to a
higher level.
The load was too large.
Do not exceed the maximum load
size.
The airflow slots are clogged.
Clean the airflow slots at the bot‐
tom of the appliance.
There is some dirt on the humidity
sensor in the drum.
Clean the front surface of the
drum.
The dryness level was not set to
the desired level.
Adjust the dryness level.
4)
The condenser is clogged.
Clean the condenser.
2)
The loading
door does not
close
The filter is not locked into posi‐
tion.
Put the filter in the correct position.
Laundry is trapped between the
door and the seal.
Remove trapped items and close
the door.
It is not possible
to change the
program or op‐
tion.
After a cycle starts it is not possi‐
ble to change the program or op‐
tion.
Turn the tumble dryer off and on.
Change the program or option as
required.
It is not possible
to select an op‐
tion. An acoustic
signal is emit‐
ted.
The option you tried to select is not
available for the selected program.
Turn the tumble dryer off and on.
Change the program or option as
required.
There is no
drum light
Defective drum lamp.
Contact the service centre to re‐
place the drum lamp.
Unexpected du‐
ration time ap‐
pears on the
display.
The drying duration is calculated
according to load size and damp‐
ness.
This is automated - the appliance
is working correctly.
A program is in‐
active.
The water container is full.
Drain the water container, push the
Start/Pause button.
2)
ENGLISH
25