AEG T8DBG842R User Manual - Page 16
Care And Cleaning
View all AEG T8DBG842R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
16 www.aeg.com • Always keep the airflow slots at the bottom of the appliance clear. • Make sure there is good airflow where the appliance is to be installed. 9.2 Adjustment of default dryness level To change the default dryness level: 1. Turn the appliance on. 2. Select 1 of the available programs. 3. Touch and hold down the Dryness Level and Anti-crease buttons at the same time. One of the symbols appears on the display: - Maximum dryness - Extra dryness - Standard dryness 4. Touch the Start/Pause button repeatedly until you reach the desired dryness level. Dryness level Display symbol Maximum dryness Extra dryness Standard dryness 10. CARE AND CLEANING 10.1 Cleaning the filter At the end of each cycle the Filter symbol comes on the display and you must clean the filter. The filter collects the fluff during the drying cycle. 5. To memorise the setting touch and hold down the Dryness Level and Anti-crease buttons at the same time for approximately 2 seconds. 9.3 Deactivating the tank indicator The water container indicator is activated by default. It illuminates at the end of the drying cycle or during the cycle if the water reservoir is full. If the draining kit is installed the water container is drained automatically and the indicator can be deactivated. To deactivate the indicator: 1. Turn the appliance on. 2. Select 1 of the available programs. 3. Touch and hold down Anti-crease and Time Drying buttons at the same time. One of 2 configurations is possible: • the Tank indicator: is on if the symbol appears - the water container indicator is permanently activated • the Tank indicator: is off if the symbol appears - the water container indicator is permanently deactivated 1. Open the door. Pull the filter up. 2. Push the hook to open the filter.