AEG FFB41600ZW User Manual - Page 8

8 www.aeg.com 5.1 Consumption values Programme 1) Water (l) 11 Energy (kWh) 1.039 Duration (min) 227 7 - 12 0.7 - 1.4 45 - 156 14-15 1.5 - 1.7 155 - 170 10 0.8 30 1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can change the values. 5.2 Information for test institutes For all the necessary information for test performance, send an email to: 6. SETTINGS [email protected] Write down the product number (PNC) that is on the rating plate. 6.1 Programme selection mode and user mode When the appliance is in programme selection mode it is possible to set a programme and to enter the user mode. Settings available in the user mode: • The level of water softener according to the water hardness. • Activation or deactivation of the rinse aid empty notification. • Activation or deactivation of AirDry. As the appliance stores the saved settings, there is no need to configure it before every cycle. How to set the programme selection mode The appliance is in programme selection mode when the programme indicator flashes and the display shows the programme duration. After activation, the appliance is in programme selection mode by default. If not, set the programme selection mode the following way: Press and hold simultaneously Delay and Option until the appliance is in programme selection mode. 6.2 The water softener The water softener removes minerals from the water supply, which would have a detrimental effect on the washing results and on the appliance. The higher the content of these minerals, the harder your water is. Water hardness is measured in equivalent scales. The water softener should be adjusted according to the hardness of the water in your area. Your local water authority can advise you on the hardness of the water in your area. It is important to set the right level of the water softener to assure good washing results.