AEG FFB41600ZW User Manual - Page 20

Authorised Service Centre.

Page 20 highlights

20 www.aeg.com Problem Possible cause and solution The dishes are wet. • For the best drying performance activate the option XtraDry and set AirDry . • The programme does not have a drying phase or has a drying phase with low temperature. • The rinse aid dispenser is empty. • The quality of the rinse aid can be the cause. • The quality of the multi-tablets can be the cause. Try a different brand or activate the rinse aid dispenser and use rinse aid and multi-tablets together. The interior of the appliance is • This is not a defect of the appliance. it is caused by wet. the humidity in the air that condenses on the walls. Unusual foam during washing. • Use the detergent for dishwashers only. • There is a leak in the rinse aid dispenser. Contact an Authorised Service Centre. Traces of rust on cutlery. • There is too much salt in the water used for washing. Refer to "The water softener". • Silver and stainless steel cutlery were placed together. Avoid to put silver and stainless steel items close together. There are residues of detergent in the dispenser at the end of the programme. • The detergent tablet got stuck in the dispenser and therefore was not completely washed away by water. • Water cannot wash away the detergent from the dispenser. Make sure that the spray arm is not blocked or clogged. • Make sure that items in the baskets do not impede the lid of the detergent dispenser from opening. Odours inside the appliance. • Refer to "Internal cleaning". Limescale deposits on the tableware, on the tub and on the inside of the door. • The level of salt is low, check the refill indicator. • The cap of the salt container is loose. • Your tap water is hard. Refer to "The water softener". • Even using multi-functional tabs use salt and set re- generation of the water softener. Refer to "The water softener". • If lime scale deposits still remain, clean the appliance with appliance cleaners which are particularly suitable for this purpose. • Try different detergent. • Contact the detergent manufacturer. Dull, discoloured or chipped tableware. • Make sure that only dishwasher-safe items are washed in the appliance. • Load and unload the basket carefully. Refer to basket loading leaflet. • Place delicate items in the upper basket.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24

Problem
Possible cause and solution
The dishes are wet.
For the best drying performance activate the option
XtraDry and set AirDry .
The programme does not have a drying phase or has
a drying phase with low temperature.
The rinse aid dispenser is empty.
The quality of the rinse aid can be the cause.
The quality of the multi-tablets can be the cause. Try a
different brand or activate the rinse aid dispenser and
use rinse aid and multi-tablets together.
The interior of the appliance is
wet.
This is not a defect of the appliance. it is caused by
the humidity in the air that condenses on the walls.
Unusual foam during washing.
Use the detergent for dishwashers only.
There is a leak in the rinse aid dispenser. Contact an
Authorised Service Centre.
Traces of rust on cutlery.
There is too much salt in the water used for washing.
Refer to
"The water softener"
.
Silver and stainless steel cutlery were placed together.
Avoid to put silver and stainless steel items close to-
gether.
There are residues of deter-
gent in the dispenser at the
end of the programme.
The detergent tablet got stuck in the dispenser and
therefore was not completely washed away by water.
Water cannot wash away the detergent from the dis-
penser. Make sure that the spray arm is not blocked or
clogged.
Make sure that items in the baskets do not impede the
lid of the detergent dispenser from opening.
Odours inside the appliance.
Refer to
"Internal cleaning"
.
Limescale deposits on the ta-
bleware, on the tub and on
the inside of the door.
The level of salt is low, check the refill indicator.
The cap of the salt container is loose.
Your tap water is hard. Refer to
"The water softener"
.
Even using multi-functional tabs use salt and set re-
generation of the water softener. Refer to
"The water
softener"
.
If lime scale deposits still remain, clean the appliance
with appliance cleaners which are particularly suitable
for this purpose.
Try different detergent.
Contact the detergent manufacturer.
Dull, discoloured or chipped
tableware.
Make sure that only dishwasher-safe items are washed
in the appliance.
Load and unload the basket carefully. Refer to basket
loading leaflet.
Place delicate items in the upper basket.
www.aeg.com
20