2013 Yamaha Motorsports V Star 950 Owners Manual - Page 54
2013 Yamaha Motorsports V Star 950 Manual
Page 54 highlights
PERIODIC MAINTENANCE AND ADJUSTMENT TIP An oil filter wrench is available at a Yamaha dealer. 5. Apply a thin coat of clean engine oil to the O-ring of the new oil filter cartridge. 1 2 1. Engine oil drain bolt 2. Gasket 1 2 1. Torque wrench 2. Oil filter cartridge TIP Skip steps 4-6 if the oil filter cartridge is not being replaced. 7 4. Remove the oil filter cartridge with an oil filter wrench. 1. O-ring Tightening torque: Oil filter cartridge: 17 Nm (1.7 m·kgf, 12 ft·lbf) TIP Make sure that the O-ring is properly seated. 6. Install the new oil filter cartridge with an oil filter wrench, and then tighten it to the specified torque with a torque wrench. 7. Install the engine oil drain bolt and its new gasket, and then tighten the bolt to the specified torque. Tightening torque: Engine oil drain bolt: 43 Nm (4.3 m·kgf, 31 ft·lbf) 2 1 8. Refill with the specified amount of the recommended engine oil, and then install and tighten the oil filler cap. 1. Oil filter wrench 2. Oil filter cartridge 7-12