2012 Yamaha Motorsports VMAX Owners Manual - Page 53
2012 Yamaha Motorsports VMAX Manual
Page 53 highlights
OPERATION AND IMPORTANT RIDING POINTS a warning or indicator light remains on, see page 4-2 for the corresponding warning and indicator light circuit check. The ABS warning light should come on when the main switch is turned to "ON" and then go off after traveling at a speed of 10 km/h (6 mi/h) or higher. ECA17680 tery. Do not crank the engine more than 10 seconds on any one attempt. ECA11042 EAU16671 Shifting 5 4 3 2 N 1 NOTICE For maximum engine life, never accelerate hard when the engine is cold! 2 1 NOTICE If the ABS warning light does not come on and then go off as explained above, see page 4-2 for the indicator light circuit check. 2. Shift the transmission into the neutral position. The neutral indicator light should come on. If not, ask a Yamaha dealer to check the electrical circuit. 3. Start the engine by pushing the start switch. If the engine fails to start, release the start switch, wait a few seconds, and then try again. Each starting attempt should be as short as possible to preserve the bat6-2 1. Shift pedal 2. Neutral position Shifting gears lets you control the amount of engine power available for starting off, accelerating, climbing hills, etc. The gear positions are shown in the illustration. TIP To shift the transmission into the neutral position, press the shift pedal down repeatedly until it reaches the end of its travel, and then slightly raise it. 6