2012 Yamaha Motorsports Majesty Owners Manual - Page 58
2012 Yamaha Motorsports Majesty Manual
Page 58 highlights
PERIODIC MAINTENANCE AND ADJUSTMENT the bolt to the specified torque. 1 2 3 4 5 6 7 8 9 Tightening torque: Engine oil drain bolt: 20 Nm (2.0 m·kgf, 14 ft·lbf) "ENERGY CONSERVING II" or higher. Be sure no foreign material enters the crankcase. 10. Start the engine, and then let it idle for several minutes while checking it for oil leakage. If oil is leaking, immediately turn the engine off and check for the cause. 11. Reset the oil change indicator according to the following procedure. To reset the oil change indicator 1. Turn the key to "ON". 2. Hold the "OIL CHANGE" button pushed for two to eight seconds. ton, and the oil change indicator will go off. 9. Refill with the specified amount of the recommended engine oil, and then install and tighten the oil filler cap. Recommended engine oil: See page 9-1. Oil quantity: Without oil filter element replacement: 1.50 L (1.59 US qt, 1.32 Imp.qt) With oil filter element replacement: 1.70 L (1.80 US qt, 1.50 Imp.qt) TIP If the engine oil is changed before the oil change indicator comes on (i.e. before the periodic oil change interval has been reached), the indicator must be reset after the oil change for the next periodic oil change to be indicated at the correct time. To reset the oil change indicator before the periodic oil change interval has been reached, follow the above procedure, but note that the indicator will come on for 1.4 seconds after releasing the "OIL CHANGE" button, otherwise repeat the procedure. TIP Be sure to wipe off spilled oil on any parts after the engine and exhaust system have cooled down. ECA11670 NOTICE Do not use oils with a diesel specification of "CD" or oils of a higher quality than specified. In addition, do not use oils labeled 1 1. "OIL CHANGE" button 3. Release the "OIL CHANGE" but7-17