2012 Yamaha Motorsports Majesty Owners Manual - Page 57
2012 Yamaha Motorsports Majesty Manual
Page 57 highlights
PERIODIC MAINTENANCE AND ADJUSTMENT 2. Start the engine, warm it up for several minutes, and then turn it off. 3. Place an oil pan under the engine to collect the used oil. 4. Remove the engine oil filler cap, the engine oil drain bolt and its gasket to drain the oil from the crankcase. spring will fall out. Take care not to lose the compression spring.[ECA12911] 1 2 3 4 2 3 1 1. Oil filter element cover 2 1. Bolt 2. Oil filter element cover 2. O-ring 3. Compression spring 4. Oil filter element 4 5 6 7 8 9 1 2 6. Remove and replace the oil filter element and O-rings. 7. Install the compression spring and oil filter element cover by installing the bolts, then tightening them to the specified torque. Tightening torque: Oil filter element cover bolt: 10 Nm (1.0 m·kgf, 7.2 ft·lbf) 1. Engine oil drain bolt 2. Gasket TIP Skip steps 5-7 if the oil filter element is not being replaced. 5. Remove the oil filter element cover by removing the bolts. NOTICE: When removing the oil filter element cover, the compression 7-16 TIP Make sure that the O-rings are properly seated. 8. Install the engine oil drain bolt and its new gasket, and then tighten