2012 Yamaha Motorsports Grizzly 700 4x4 Owners Manual - Page 31
2012 Yamaha Motorsports Grizzly 700 4x4 Manual
Page 31 highlights
1 G LOCK 4WD G 1. On-Command differential gear lock switch "4WD"/"LOCK" Riding before the differential gear is properly engaged or disengaged (e.g., when the indicator and indicator light are flashing) will cause the vehicle speed to be limited until the differential gear is completely engaged or disengaged. When the ATV is in four-wheel-drive differential gear lock, the maximum traveling speed is limited to 35 km/h (22 mi/h). However, if conditions require full engine power to be available, push and hold the override switch to disable the differential gear lock speed limiter. (See page 4-8 for a detailed explanation of this switch.) 4 To unlock the differential gear, stop the ATV and push the switch to the "4WD" position. TIP G When the switch is set to "LOCK" or "4WD", the differential gear lock indicator and indicator light will flash until the differential gear is completely locked or unlocked. G When the indicator and indicator light are flashing, turning the handlebar back and forth will help the differential gear lock to engage or disengage. EBU18282 Throttle lever Once the engine is running, pushing the throttle lever will increase the engine speed. Regulate the speed of the ATV by varying the throttle position. Because the throttle is springloaded, the ATV will decelerate, and the engine will return to an idle any time the throttle lever is released. 4-12