2012 Yamaha Motorsports Grizzly 700 4x4 Owners Manual - Page 112
2012 Yamaha Motorsports Grizzly 700 4x4 Manual
Page 112 highlights
To check the differential gear oil level 1. Place the ATV on a level surface. 2. Remove the differential gear oil filler bolt and its gasket, and then check the oil level in the differential gear case. The oil level should be at the brim of the filler hole. 5. Install the oil filler bolt and its gasket, and then tighten the bolt to the specified torque. Tightening torque: Differential gear oil filler bolt: 23 Nm (2.3 m·kgf, 17 ft·lbf) To change the differential gear oil 1. Place the ATV on a level surface. 2. Place an oil pan under the differential gear case to collect the used oil. 3. Remove the differential gear oil filler bolt, the differential gear oil drain bolt and their gasket to drain the oil from the differential gear case. 1 2 3 8 1. 2. 3. 4. Differential gear oil filler bolt Gasket Differential gear oil Correct oil level 4 3. If the oil is below the brim of the filler hole, add sufficient oil of the recommended type to raise it to the correct level. 4. Check the gasket for damage, and replace it if necessary. 8-30