2012 Yamaha Motorsports Grizzly 450 4x4 EPS Owners Manual - Page 24
2012 Yamaha Motorsports Grizzly 450 4x4 EPS Manual
Page 24 highlights
EBU18037 Multi-function display G an hour meter (which shows the total time the key has been turned to "ON") 4 1. 2. 3. 4. 5. 6. 7. Speedometer "H" button "M" button Clock/Hour meter Odometer/Tripmeter A/Tripmeter B "TRIP/ODO" button Clock/Hour " / " button Odometer and tripmeter modes Pushing the "TRIP/ODO" button switches the display between the odometer mode "ODO" and the tripmeter modes "TRIP A" and "TRIP B" in the following order: ODO → TRIP A → TRIP B → ODO To reset a tripmeter, select it by pushing the "TRIP/ODO" button, and then push the "TRIP/ODO" button for at least three seconds. The tripmeters can be used to estimate the distance that can be traveled with a full tank of fuel. This information will enable you to plan future fuel stops. TIP Pushing and holding in the "TRIP/ODO" button, and turning the key to "ON" while the button is pushed, switches the display between "mph" and "km/h". Clock mode Pushing the " / " button switches the display between the clock mode "CLOCK" and the hour meter mode "HOUR" in the following order: CLOCK → HOUR → CLOCK 4-5 The multi-function display is equipped with the following: G a speedometer G an odometer G two tripmeters (which show the distance traveled since they were last set to zero) G a clock