2012 Yamaha Motorsports Grizzly 450 4x4 EPS Owners Manual - Page 106
2012 Yamaha Motorsports Grizzly 450 4x4 EPS Manual
Page 106 highlights
7. Check the oil filler bolt gasket for damage, and replace it if necessary. 8. Install the oil filler bolt and its gasket, and then tighten the bolt to the specified torque. Tightening torque: Final gear oil filler bolt: 22 Nm (2.2 m·kgf, 16 ft·lbf) 9. Check the final gear case for oil leakage. If oil is leaking, check for the cause. 10. Install the engine guard and the final gear case guard by installing the bolts, and then tightening them to the specified torques. 8 Tightening torques: Engine guard bolt: 7 Nm (0.7 m·kgf, 5.1 ft·lbf) Final gear case guard bolt: 7 Nm (0.7 m·kgf, 5.1 ft·lbf) EBU23426 checked and the oil changed as follows at the intervals specified in the periodic maintenance and lubrication chart. To check the differential gear oil level 1. Place the ATV on a level surface. 2. Remove the differential gear oil filler bolt and its gasket, and then check the oil level in the differential gear case. The oil level should be at the brim of the filler hole. 1 2 3 4 Differential gear oil The differential gear case must be checked for oil leakage before each ride. If any leakage is found, have a Yamaha dealer check and repair the ATV. In addition, the differential gear oil level must be 8-24 1. 2. 3. 4. Differential gear oil filler bolt Gasket Differential gear oil Correct oil level