2012 Yamaha Motorsports FX Nytro RTX Owners Manual - Page 74

2012 Yamaha Motorsports FX Nytro RTX Manual

Get 2012 Yamaha Motorsports FX Nytro RTX PDF manuals and user guides View all 2012 Yamaha Motorsports FX Nytro RTX manuals

Page 74 highlights

Periodic maintenance and adjustment 10. Rotate the secondary sliding sheave clockwise and push it so that it separates from the secondary fixed sheave. 1. Dipstick 4. 1. Secondary sliding sheave 2. Secondary fixed sheave 11. Install the V-belt between the secondary sliding and fixed sheaves. Remove the dipstick and check that the oil level is within the range shown at the bottom of the dipstick. If the oil does not reach the bottom of the dipstick, add sufficient oil of the recommended type to raise it to the correct level. NOTICE: Make sure that no foreign material enters the drive chain housing. [ECS00531] 1. V-belt 1 1. Oil level range 12. Install the drive guard, and then install the left side cover and the shroud. ESU12834 Drive chain housing To check the drive chain housing oil level 1. 2. Place the snowmobile on a level surface and apply the parking brake. Remove the shroud and the right side cover. (See page 52 for removal procedures.) Remove the dipstick, wipe it off with a clean rag, and then screw it back into the filler hole. 3. Recommended drive chain oil: SAE 75W or 80W API GL-3 Gear oil 68

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
Periodic maintenance and adjustment
68
10. Rotate the secondary sliding sheave
clockwise and push it so that it separates
from the secondary fixed sheave.
11.
Install the V-belt between the secondary
sliding and fixed sheaves.
12.
Install the drive guard, and then install the
left side cover and the shroud.
ESU12834
Drive chain housing
To check the drive chain housing oil
level
1.
Place the snowmobile on a level surface
and apply the parking brake.
2.
Remove the shroud and the right side
cover. (See page 52 for removal proce-
dures.)
3.
Remove the dipstick, wipe it off with a
clean rag, and then screw it back into the
filler hole.
4.
Remove the dipstick and check that the
oil level is within the range shown at the
bottom of the dipstick. If the oil does not
reach the bottom of the dipstick, add suf-
ficient oil of the recommended type to
raise it to the correct level.
NOTICE:
Make sure that no foreign material en-
ters the drive chain housing.
[ECS00531]
1.
Secondary sliding sheave
2.
Secondary fixed sheave
1. V-belt
1. Dipstick
1.
Oil level range
Recommended drive chain oil:
SAE 75W or 80W API GL-3 Gear oil
1