2012 Yamaha Motorsports Big Bear 400 4x4 IRS Owners Manual - Page 48

2012 Yamaha Motorsports Big Bear 400 4x4 IRS Manual

Page 48 highlights

EBU19873 OPERATION EWB00011 WARNING Indicates a hazardous situation which, if not avoided, could result in death or serious injury. EBU19901 6 Read the Owner's Manual carefully before riding the ATV. If there is a control or function you do not understand, ask your Yamaha dealer. EWB00631 1. Set the parking brake. 2. Turn the fuel cock to "ON". 3. Turn the key to "ON" and the engine stop switch to " ". 4. Shift the transmission into neutral. The neutral indicator light should come on. If the indicator light does not come on, have a Yamaha dealer check the electrical circuit. TIP The engine can be started under the following conditions: G The transmission is in neutral. G The rear brake lever is applied with the transmission in any gear. However, it is recommended to shift into neutral before starting the engine. 5. Use the starter (choke) in reference to the figure: Position (1): Cold engine start with ambient temperature below 5 °C (40 °F). Position (2): Cold engine start with ambient temperature between 0 °C (30 °F) and 30 °C (90 °F). 6-1 WARNING Read the Owner's Manual carefully to become familiar with all controls in order to help prevent any loss of control, which could cause an accident or injury. EBU19994 Starting a cold engine ECB00150 NOTICE See the "Engine break-in" section on page 6-5 prior to operating the engine for the first time.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156

6-1
6
EBU19873
OPERATION
WARNING
EWB00011
Indicates a hazardous situation which, if not
avoided, could result in death or serious injury.
EBU19901
Read the Owner’s Manual carefully before riding
the ATV. If there is a control or function you do not
understand, ask your Yamaha dealer.
WARNING
EWB00631
Read the Owner’s Manual carefully to become
familiar with all controls in order to help pre-
vent any loss of control, which could cause an
accident or injury.
EBU19994
Starting a cold engine
NOTICE
ECB00150
See the “Engine break-in” section on page 6-5
prior to operating the engine for the first time.
1.
Set the parking brake.
2.
Turn the fuel cock to “ON”.
3. Turn the key to “ON” and the engine stop
switch to “
”.
4.
Shift the transmission into neutral. The neutral
indicator light should come on. If the indicator
light does not come on, have a Yamaha deal-
er check the electrical circuit.
TIP
The engine can be started under the following con-
ditions:
The transmission is in neutral.
The rear brake lever is applied with the transmis-
sion in any gear. However, it is recommended to
shift into neutral before starting the engine.
5.
Use the starter (choke) in reference to the fig-
ure:
Position (1):
Cold engine start with ambient temperature
below 5 °C (40 °F).
Position (2):
Cold engine start with ambient temperature
between 0 °C (30 °F) and 30 °C (90 °F).