2012 Yamaha Motorsports Apex X-TX Owners Manual - Page 27
2012 Yamaha Motorsports Apex X-TX Manual
Page 27 highlights
Control functions 2. Open the auxiliary DC jack cap, and then insert the accessory power plug into the jack. To use the helmet shield heater jack 1. 2. Start the engine. Open the helmet shield heater jack cap, and then insert the power plug of the helmet shield heater into the jack. 1 1 2 2 1. Auxiliary DC jack cap 2. Auxiliary DC jack 3. After using the auxiliary DC jack, be sure to remove the accessory power plug from the jack and to close the auxiliary DC jack cap. 1. Helmet shield heater jack cap 2. Helmet shield heater jack 3. ECS00122 After using the helmet shield heater, be sure to remove its power plug from the jack and to close the jack cap. NOTICE G ECS00892 G To avoid circuit overload and a possible fuse blowing, do not use accessories requiring more than the maximum rated capacity for the auxiliary DC jack. (See page 79 for the specified fuse amperage.) Do not use an automotive cigarette lighter or other accessory with a plug that gets hot because the jack can be damaged. Maximum rated capacity: DC 12 V, 2.5 A (30 W) NOTICE To avoid circuit overload and a possible fuse blowing, do not use a helmet shield heater requiring more than the maximum rated capacity for the helmet shield heater jack. (See page 79 for the specified fuse amperage.) Maximum rated capacity: DC 12 V, 1.5 A (18 W) ESU13523 Brake lever The snowmobile is stopped by braking the entire drive system. Squeeze the brake lever towards the handlebar grip to stop the snowmobile. ESU13264 Helmet shield heater jack The helmet shield heater jack is located on the left side of the handlebar. TIP The helmet shield heater jack can only be used if the engine is running. 21