2011 Yamaha Motorsports RS Viking Professional Owners Manual - Page 63
2011 Yamaha Motorsports RS Viking Professional Manual
Page 63 highlights
Periodic maintenance and adjustment Parking brake cable length: 43.5-46.5 mm (1.713-1.831 in) 5. 6. Tighten the parking brake cable locknut. Turn the parking brake pad adjusting bolt in or out to adjust the clearance between the parking brake pads and the brake disc. 1. Parking brake pad wear limit 4 3 Parking brake pad wear limit: 1.2 mm (0.047 in) 3. Close the shroud. To adjust the parking brake As the parking brake pads wear, adjustment may be necessary to ensure proper brake performance. 1. Open the shroud. 2. Loosen the parking brake pad adjusting bolt locknut and the parking brake pad adjusting bolt. 3. Loosen the parking brake cable locknut. 4. Turn the parking brake cable adjusting bolt in or out to adjust the cable length. 1. 2. 3. 4. Parking brake pad Brake disc Parking brake pad adjusting bolt Parking brake pad adjusting bolt locknut Parking brake pad to brake disc clearance (a) + (b): 1.5-2.0 mm (0.059-0.079 in) 7. 8. Tighten the parking brake pad adjusting bolt locknut. Close the shroud. Checking the brake fluid level EWS00460 WARNING Be careful that water does not enter the master cylinder when refilling. Water will significantly lower the boiling point of the fluid and may result in vapor lock. If the brake fluid level goes down, consult a Yamaha dealer. 1. 2. 3. 4. 5. Parking brake pad adjusting bolt locknut Parking brake pad adjusting bolt Parking brake cable length Parking brake cable locknut Parking brake cable adjusting bolt 57