2011 Yamaha Motorsports Grizzly 350 Owners Manual - Page 91
2011 Yamaha Motorsports Grizzly 350 Manual
Page 91 highlights
1. Air filter element frame 2. Sponge material 3. Air filter element lock plate 6. Wash the sponge material gently but thoroughly in solvent. WARNING! Always use parts cleaning solvent to clean the sponge material. Never use low-flash-point solvents or gasoline to clean the sponge material because the engine could catch fire or explode. [EWB01941] 7. Squeeze the excess solvent out of the sponge material and let it dry. NOTICE: Do not twist the sponge material when squeezing it. [ECB00441] 8. Check the sponge material and replace it if damaged. 9. Apply Yamaha foam air filter oil or other quality foam air filter oil to the sponge material. TIP The sponge material should be wet but not dripping. 10. Pull the sponge material over the air filter element frame, and then install the lock plate. 11. Insert the air filter element into the air filter case, and then install the air filter case cover by hooking the holders onto the air filter case. NOTICE: Make sure that the air filter element is properly seated in the air filter 8-21 8