2011 Yamaha Motorsports Grizzly 350 Owners Manual - Page 22
2011 Yamaha Motorsports Grizzly 350 Manual
Page 22 highlights
EBU18061 EBU18101 Handlebar switches Start switch " " Push this switch to crank the engine with the starter. See the starting instructions on page 6-1 prior to starting the engine. EBU18152 4 Light switch " / /OFF" Set this switch to " " to turn on the low beams and the taillight. Set the switch to " " to turn on the high beams and the taillight. Set the switch to "OFF" to turn off all the lights. ECB00041 1. Light switch " / 2. Engine stop switch " 3. Start switch " " EBU18080 /OFF" / " Engine stop switch " / " Set this switch to " " before starting the engine. The engine stop switch controls the ignition and stops the engine when it is running. Use this switch to stop the engine in an emergency situation. The engine will not start or run when this switch is set to " ". NOTICE Do not use the headlights with the engine turned off for an extended period of time, otherwise the battery may discharge to the point that the starter motor will not operate properly. If this should happen, remove the battery and recharge it. See page 8-36 for battery charging information. EBU18282 Throttle lever Once the engine is running, pushing the throttle lever will increase the engine speed. 4-3