2011 Yamaha Motorsports Apex SE Owners Manual - Page 40
2011 Yamaha Motorsports Apex SE Manual
Page 40 highlights
Control functions 1 3 2 1. Red paint area 2. Adjustable range 3. Standard position 3. Tighten the locknut while holding the adjusting nut in place. NOTICE: Always tighten the locknut against the adjusting nut, and then tighten the locknut to the specified torque. [ECS00860] Locknut tightening torque: 25 Nm (2.5 m·kgf, 18 ft·lbf) 1. Locknut 2. Control rod adjusting nut ESU13820 EXUP system This model is equipped with Yamaha's EXUP (EXhaust Ultimate Power valve) system. This system boosts engine power by means of a valve that regulates the inner diameter of the exhaust pipe. The EXUP system valve is constantly adjusted in accordance with the engine speed by a computer-controlled servomotor. ECS01020 2. To increase weight transfer, turn the adjusting nut in direction (a), and to decrease weight transfer, turn it in direction (b). WARNING! Never adjust the control rods beyond the maximum setting, indicated by red paint; otherwise, they could be damaged, which could lead to an accident or injury. [EWS00173] NOTICE The EXUP system has been set and extensively tested at the Yamaha factory. Changing these settings without sufficient technical knowledge may result in poor performance of or damage to the engine. 34