2010 Yamaha Motorsports Road Star Silverado S Owners Manual - Page 84
2010 Yamaha Motorsports Road Star Silverado S Manual
Page 84 highlights
PERIODIC MAINTENANCE AND ADJUSTMENT EAU24212 EAU31963 Replacing a turn signal light bulb 1. Remove the turn signal lens by removing the screws. Replacing a license plate light bulb 1. Remove the license plate light unit by removing the bolts. 3. Remove the burnt-out bulb by pulling it out. 1 1. Bulb 1. Screw 1. Bolt 7 2. Remove the burnt-out bulb by pushing it in and turning it counterclockwise. 3. Insert a new bulb into the socket, push it in, and then turn it clockwise until it stops. 4. Install the lens by installing the screws. NOTICE: Do not overtighten the screws, otherwise the lens may break. [ECA10681] 2. Remove the license plate light socket (together with the bulb) by turning it counterclockwise, and then pulling it out. 4. Insert a new bulb into the socket. 5. Install the socket (together with the bulb) by pushing it in, and then turn it clockwise until it stops. 6. Install the license plate light unit by installing the bolts. 7-37