2010 Yamaha Motorsports Road Star Silverado S Owners Manual - Page 72
2010 Yamaha Motorsports Road Star Silverado S Manual
Page 72 highlights
PERIODIC MAINTENANCE AND ADJUSTMENT 3. Tighten the locknut. EWA10630 EAU22273 EAU22392 Brake light switches WARNING G Checking the front and rear brake pads The front and rear brake pads must be checked for wear at the intervals specified in the periodic maintenance and lubrication chart. EAU36890 G 7 After adjusting the brake lever free play, check the free play and make sure that the brake is working properly. A soft or spongy feeling in the brake lever can indicate the presence of air in the hydraulic system. If there is air in the hydraulic system, have a Yamaha dealer bleed the system before operating the motorcycle. Air in the hydraulic system will diminish the braking performance, which may result in loss of control and an accident. Front brake pads 1. Rear brake light switch 2. Rear brake light switch adjusting nut The brake light, which is activated by the brake pedal and brake lever, should come on just before braking takes effect. If necessary, adjust the rear brake light switch as follows, but the front brake light switch should be adjusted by a Yamaha dealer. Turn the rear brake light switch adjusting nut while holding the rear brake light switch in place. To make the brake light come on earlier, turn the adjusting nut in direction (a). To make the brake light come on later, turn the adjusting nut in direction (b). 1 1 1. Brake pad wear indicator Each front brake pad is provided with wear indicators, which allows you to check the brake pad wear without having to disassemble the brake. To check the brake pad wear, check the position of the wear indicators while applying the brake. If a brake pad has worn to 7-25