2010 Yamaha Motorsports Raider Owners Manual - Page 28
2010 Yamaha Motorsports Raider Manual
Page 28 highlights
INSTRUMENT AND CONTROL FUNCTIONS EAU34042 EAU44441 Rider seat To remove the rider seat 1. Insert the key into the seat lock, and then turn it counterclockwise. Helmet holder 4 1. Projection 2. Seat holder 2. Push the front of the seat down to lock it in place. 3. Remove the key. 1. Seat lock 2. Unlock. 1. Helmet holding cable 2. Helmet holder 2. While holding the key in that position, lift the front of the seat up, and then pull the seat off. To install the rider seat 1. Insert the projection on the rear of the seat into the seat holder as shown. TIP Make sure that the seat is properly secured before riding. The helmet holder is located under the rider seat. A helmet holding cable is provided under the rider seat to secure a helmet to the helmet holder. To secure a helmet to the helmet holder 1. Remove the rider seat. (See page 4-12.) 2. Pass the helmet holding cable through the buckle on the helmet strap as shown, and then hook the cable loop over the helmet holder. 4-12