2010 Yamaha Motorsports Phazer GT Owners Manual - Page 67
2010 Yamaha Motorsports Phazer GT Manual
Page 67 highlights
Periodic maintenance and adjustment 6. Install the right upper cover, and then install the top cover (PZ50RT / PZ50GT / PZ50MT) or close the shroud (PZ50VT). ESU12083 V-belt EWS00401 WARNING G 1. "COLD LEVEL" mark 2. Coolant reservoir cap G Coming in contact with the rotating Vbelt or clutch parts can cause severe injury or death. Never run the engine with the drive guard removed. Make sure that the drive guard is tightened securely before operating the snowmobile to protect against severe injury or death from a broken V-belt or other part should it come off the snowmobile while it is in operation. ECS00830 NOTICE Never run the engine with the V-belt removed. Clutch components can be damaged. Recommended antifreeze: High-quality ethylene glycol antifreeze containing corrosion inhibitors Antifreeze and water mixing ratio: 3:2 Total amount: PZ50GT 3.60 L (3.81 US qt, 3.17 Imp.qt) PZ50MT 3.60 L (3.81 US qt, 3.17 Imp.qt) PZ50RT 3.60 L (3.81 US qt, 3.17 Imp.qt) PZ50VT 3.70 L (3.91 US qt, 3.26 Imp.qt) 4. 5. Start the engine, allow it to idle for several minutes, and then turn it off. Check for any coolant leakage. The V-belt should be checked before each ride. To check the V-belt 1. Remove the left side cover (PZ50RT / PZ50GT / PZ50MT), or open the shroud and remove the left upper cover and the left side cover (PZ50VT). (See page 48 for removal procedure.) 2. Remove the drive guard. 3. Check the V-belt for wear and damage. Replace if necessary. TIP If you find any leaks, consult a Yamaha dealer. 61