2010 Yamaha Motorsports Grizzly 700 4x4 Owners Manual - Page 112
2010 Yamaha Motorsports Grizzly 700 4x4 Manual
Page 112 highlights
water has been used instead of coolant, replace it with coolant as soon as possible, otherwise the cooling system will not be protected against frost and corrosion. If water has been added to the coolant, have a Yamaha dealer check the antifreeze content of the coolant as soon as possible, otherwise the effectiveness of the coolant will be reduced. [ECB01011] Coolant reservoir capacity (up to the maximum level mark): 0.24 L (0.25 US qt, 0.21 Imp.qt) TIP The radiator fan is automatically switched on or off according to the coolant temperature in the radiator. G If the engine overheats, see page 8-64 for further instructions. G EBU27762 To change the coolant EWB01890 8 1. Coolant reservoir cap 2. Maximum level mark 3. Minimum level mark WARNING Wait for the engine and radiator to cool before removing the radiator cap. You could be burned by hot fluid and steam blown out under pressure. Always place a thick rag over the cap when opening. Allow any remaining pressure to escape before completely removing the cap. 1. Place the ATV on a level surface. 2. Remove panels D and F. (See page 8-8.) 8-32