2010 Yamaha Motorsports FX Nytro RTX SE Owners Manual - Page 31
2010 Yamaha Motorsports FX Nytro RTX SE Manual
Page 31 highlights
Control functions Center shock absorber To increase the compression damping force, turn the adjusting screw in direction (a). To decrease the compression damping force, turn the adjusting screw in direction (b). (a) (b) 1 1. Spring preload adjuster Spring preload setting: Minimum (soft): S Standard: M Maximum (hard): H ESU12755 1. Compression damping force adjusting screw Adjusting the damping forces of the center and rear shock absorbers (FX10RTR), or damping force of the rear shock absorber (FX10) ECS00880 NOTICE G Compression damping force setting: Minimum (soft): 12 click(s) in direction (b)* Standard: 6 click(s) in direction (b)* Maximum (hard): 2 click(s) in direction (b)* * With the adjusting screw fully turned in direction (a) To increase the rebound damping force, turn the adjusting dial in direction (a). To decrease the rebound damping force, turn the adjusting dial in direction (b). G G Do not continue to turn the adjuster in direction (a) after it stops. The shock absorber could be damaged and damping force adjustments will not be able to be made. Do not turn the adjuster in direction (b) beyond the adjustable range. Even if the adjuster is continually turned beyond the adjustable range, there will be no change in the damping force. Be sure to stop the adjuster at a position where there is a click. FX10RTR The compression and rebound damping forces can be adjusted by turning the adjusting screw or dial. 1. Rebound damping force adjusting dial 25