2010 Yamaha Motorsports Apex GT Owners Manual - Page 81
2010 Yamaha Motorsports Apex GT Manual
Page 81 highlights
Troubleshooting G Be sure to pull the lead covers back over the terminals completely. If the terminals are exposed, they could come into contact with the frame or a metal part of the snowmobile and this can cause electrical system damage or A FIRE HAZARD. ECS00650 NOTICE Use the connecting leads to jump-start the snowmobile only. Do not use the connecting leads for any other purpose. To start the engine using the booster battery 1. Apply the parking brake and turn the main switch to the off position. 2. Remove the shroud and the right side cover. (See page 43 for removal procedures.) 3. Remove the red (+) connecting lead from the lead holder and move it away from the black (-) connecting lead. NOTICE: Be sure to connect the red (+) jumper cable to the red (+) connecting lead and the black (-) jumper cable to the black (-) connecting lead. Do not reverse the connections. [ECS00661] 4. Pull the red (+) connecting lead cover to expose the terminal through the slit in the cover, and then connect the red (+) jumper cable to the red (+) connecting lead. 5. 6. Connect the other end of the red (+) jumper cable to the positive (+) terminal of the booster battery. Connect the black (-) jumper cable to the negative (-) terminal of the booster battery. 75