2010 Yamaha Motorsports Apex GT Owners Manual - Page 65
2010 Yamaha Motorsports Apex GT Manual
Page 65 highlights
Periodic maintenance and adjustment 10. Rotate the secondary sliding sheave clockwise and push it so that it separates from the secondary fixed sheave. 1. Dipstick 4. 1. Secondary sliding sheave 2. Secondary fixed sheave 11. Install the V-belt between the secondary sliding and fixed sheaves. Remove the dipstick and check that the oil is between the maximum and minimum level marks on the "REVERSE" side of the dipstick. If the oil is below the minimum level mark, add sufficient oil of the recommended type to raise it to the maximum level mark. NOTICE: Make sure that no foreign material enters the drive chain housing. [ECS00531] 1. V-belt 12. Install the drive guard, and then install the left side cover and the shroud. ESU12105 Drive chain housing To check the drive chain housing oil level 1. Place the snowmobile on a level surface and apply the parking brake. 2. Remove the shroud and the right side cover. (See page 43 for removal procedures.) 3. Remove the dipstick, wipe it off with a clean rag, and then insert it back into the filler hole. 1. Maximum level mark 2. Minimum level mark 59