2009 Yamaha Motorsports Venture Lite Owners Manual - Page 23
2009 Yamaha Motorsports Venture Lite Manual
Page 23 highlights
Control functions ror code will flash slowly in the tripmeter/odometer display. Note the error code, and then have a Yamaha dealer inspect the snowmobile as soon as possible. NOTICE: Do not continue to operate the engine longer than necessary if there is an error code to avoid possible engine damage. [ECS00820] 1. Drive select switch (PZ50RT / PZ50GT / PZ50MT / PZ50VT) 2. Drive "D" indicator light (PZ50RT / PZ50GT / PZ50MT / PZ50VT) 3. Reverse "R" indicator light (PZ50RT / PZ50GT / PZ50MT / PZ50VT) ECS00052 NOTICE 1. Warning light " " 2. Self-diagnosis warning indicator " 3. Two-digit error code ESU10544 " Do not use the drive select switch while the snowmobile is moving. Otherwise, the drive train could be damaged. ESU10531 Drive select switch (PZ50RT / PZ50GT / PZ50MT / PZ50VT) The drive select switch is used to shift the snowmobile into drive or reverse. After coming to a complete stop, press the drive select switch. The drive "D" indicator light comes on when the transmission is in drive (forward). The reverse "R" indicator light comes on when the transmission is in reverse. Engine stop switch " " The engine stop switch is used to stop the engine in an emergency. Simply push the stop switch to stop the engine. To start the engine, pull the stop switch and proceed with starting the engine. (See page 36 for engine starting procedures.) 1. Engine stop switch " " During the first few rides, practice using the stop switch so that you can react quickly in an emergency. 17