2009 Yamaha Motorsports V Star 950 Owners Manual - Page 23
2009 Yamaha Motorsports V Star 950 Manual
Page 23 highlights
INSTRUMENT AND CONTROL FUNCTIONS push the "RESET" switch to set the hours. 3. Push the "SELECT" switch, and the minute digits will start flashing. 4. Push the "RESET" switch to set the minutes. 5. Push the "SELECT" switch and then release it to start the clock. Self-diagnosis device code. If the odometer/tripmeter/clock display indicates any error codes, note the code number, and then have a Yamaha dealer check the vehicle. ECA11590 NOTICE If the display indicates an error code, the vehicle should be checked as soon as possible in order to avoid engine damage. Brightness control mode To set the brightness 1. Turn the key to "OFF". 2. Push and hold the "SELECT" switch. 3. Turn the key to "ON", and then release the "SELECT" switch after five seconds. 4. Adjust the multi-function meter unit panel brightness level by pushing the "SELECT" switch. 5. Push the "RESET" switch. The odometer/tripmeter/clock display will return to the prior mode. 2 3 4 5 6 1 7 1. Error code display 1 8 1. Brightness level This model is equipped with a self-diagnosis device for various electrical circuits. If a problem is detected in any of those circuits, the engine trouble warning light will come on and the odometer/tripmeter/clock display will indicate an error 9 This function allows you to adjust the brightness of the multi-function meter unit panel to suit the outside lighting conditions. 4-5