2009 Yamaha Motorsports Rhino 700 FI Auto. 4x4 Owners Manual - Page 49
2009 Yamaha Motorsports Rhino 700 FI Auto. 4x4 Manual
Page 49 highlights
The rear wheels need to be removed to adjust the rear shock absorber assemblies. (See pages 8-43-8-46 for wheel removal and installation procedures.) Adjust the spring preload as follows: To increase the spring preload, turn the adjusting ring in direction a. To decrease the spring preload, turn the adjusting ring in direction b. TIP A special wrench can be obtained at a Yamaha dealer to make this adjustment. Standard position: B A- Minimum (soft) E- Maximum (hard) 1. Special wrench 1. Spring preload adjusting ring 2. Position indicator 4-22
4-22
The rear wheels need to be removed to adjust
the rear shock absorber assemblies. (See
pages 8-43–8-46 for wheel removal and in-
stallation procedures.)
Adjust the spring preload as follows:
To increase the spring preload, turn the ad-
justing ring in direction
a
.
To decrease the spring preload, turn the ad-
justing ring in direction
b
.
1.
Spring preload adjusting ring
2.
Position indicator
TIP
A special wrench can be obtained at a
Yamaha dealer to make this adjustment.
1.
Special wrench
Standard position: B
A- Minimum (soft)
E- Maximum (hard)