2009 Yamaha Motorsports Rhino 700 FI Auto. 4x4 Owners Manual - Page 34
2009 Yamaha Motorsports Rhino 700 FI Auto. 4x4 Manual
Page 34 highlights
To reset a tripmeter, select it by pushing the "TRIP/ODO" button, and then hold the "TRIP/ ODO" button for at least three seconds. The tripmeters can be used to estimate the distance that can be traveled with a full tank of fuel. This information will enable you to plan future fuel stops. To switch the display between "mph" and "km/h", push and hold the "TRIP/ODO" button while turning the key to "ON". Clock, hour meter and voltage display modes 1 2 3 4 1. Clock/Hour button " / " 2. "H" button 3. "M" button 4. Clock/Hour meter/Voltage display Pushing the " / " button switches the display between the clock mode "CLOCK", the hour meter mode "HOUR", and the voltage display mode "btry" in the following order: CLOCK → HOUR → btry → CLOCK 4-7
4-7
To reset a tripmeter, select it by pushing the
“TRIP/ODO” button, and then hold the “TRIP/
ODO” button for at least three seconds. The
tripmeters can be used to estimate the dis-
tance that can be traveled with a full tank of fu-
el. This information will enable you to plan
future fuel stops.
To switch the display between “mph” and
“km/h”, push and hold the “TRIP/ODO” button
while turning the key to “ON”.
Clock, hour meter and voltage display
modes
1.
Clock/Hour button “
/
”
2.
“H” button
3.
“M” button
4.
Clock/Hour meter/Voltage display
Pushing the “
/
” button switches the dis-
play between the clock mode “CLOCK”, the
hour meter mode “HOUR”, and the voltage
display mode “btry” in the following order:
CLOCK
→
HOUR
→
btry
→
CLOCK
4
1
2
3