2009 Yamaha Motorsports Midnight Warrior Owners Manual - Page 20
2009 Yamaha Motorsports Midnight Warrior Manual
Page 20 highlights
INSTRUMENT AND CONTROL FUNCTIONS G G G G G two tripmeters (which show the distance traveled since they were last set to zero) a fuel reserve tripmeter (which shows the distance traveled since the fuel level warning light came on) a meter lighting control a clock a self diagnosis device Be sure to turn the key to "ON" before using the "SELECT" and "RESET" buttons. To switch the odometer, the tripmeters and the fuel reserve tripmeter displays between kilometers and miles, press the "SELECT" button for at least two seconds. 4 1. Tachometer red zone ECA11551 TIP G NOTICE Do not operate the engine in the tachometer red zone. If operated in the red zone, the tachometer segments will start flashing to notify the rider. Red zone: 5000 r/min and above Odometer and tripmeter modes Pushing the "SELECT" button switches the display between the odometer mode "ODO" and the tripmeter modes "TRIP 1" and "TRIP 2" in the following order: ODO → TRIP 1 → TRIP 2 → ODO G If the fuel level warning light comes on (see page 4-2), the odometer display will automatically change to the fuel reserve tripmeter mode "TRIP F" and start counting the distance traveled from that point. In that case, pushing the "SELECT" button switches the display between the various tripmeter and odometer modes in the following order: TRIP F → TRIP 1 → TRIP 2 → ODO → TRIP F To reset a tripmeter, select it by pushing the "SELECT" button, and then push the "RESET" button for at least one second. If you do not reset the fuel reserve tripmeter manually, it will reset itself automatically and the display will return to the prior mode after refueling and 90 seconds have passed. Meter lighting control mode 1. Turn the key to "OFF". 2. Push and hold the "SELECT" button. 3. Turn the key to "ON", and then after five seconds, release the "SELECT" button. 4. Push the "RESET" button to select the desired brightness. 4-4